Home  |  Company Profile  |  Contact Us    

PRODUCTS

Plug & Heat
A new concept in Central Heating Systems

- Classe II -  

Panel Heaters

Bathroom Heaters

Water Heaters

With Atlantic Plug & Heat no electrician is required. Simply plug the heaters into existing sockets around your home and create your own heating system. Control from one heater, using digital electronics, for comfort, ease and minimal energy use.

 

 

The heaters currently available are from the Atlantic F18 range:

Characteristics

¢  Control up to 15 Atlantic Plug & Heat heaters in one
    zone, using one Chronopass time programmer. To
    maximise energy savings and running costs zone
    rooms with common patterns of occupancy. For
    example, in apartments two zones are recommended,
    one for day rooms and one for bedrooms.

¢  Extremely accurate (better than ±0.1°C) digital
    electronic thermostats on every heater giving
    temperature control room by room that also takes
    advantage of heat from people, sunshine and
    appliances.

¢  Slimline F18 convector heater.

¢  Colour: Dove White, RAL9016.

¢  Thermal cut-out for safety if the heater becomes
    covered.

¢  Double insulated for added safety.

¢  2 year guarantee.

Note: May not be installed in wet rooms.

 

Heater sizing

As a rule of thumb for rooms of a normal height (approx. 2.4m), with average sized double glazed windows and a reasonable insulation allow for 1.00kW of heating for every 10m²/110ft² of floor area.

 

One Chronopass time programmer, code 602013, is required for each heating zone. Please go to the Controls page for information on this item.

Plug & Heat

Heat Pumps

Heat Exchangers

Controls

PROGRAMMING

APPLICATIONS

REGULATIONS

DOWNLOADS

 

 

 

 

 

 

 

PDF

 

PDF

Installation & care manual

(188KB)

 

User Instructions

(236KB)

Atlantic UK Limited     Registered in England no.3685138      EEE Producer Registration no.WEE/EE0453ZY      All rights reserved © 2009 Atlantic UK Ltd.